Today at the shop we did an oil change on a side by side, checked some batteries on a high lift loader and did an oil change on a Case 580 Construction King backhoe.
We did an oil change on a Honda 500 Pioneer side by side. We had to drain the oil and then take all the seats out to get to the oil filter to change it. Then we put the seats back on and then filled it up with fresh oil and it was good to go.
Then we went to go check a high lift loader, it was having issues starting. So we checked to see if the alternator was bad but it was still charging so then we checked the batteries and one of them had a short in it and the other one was pretty old, so we told the guy it would probably be best to just replace both of them. After that we went back to the shop to pick up a pump to pump the oil out of a backhoe because the guy couldn’t get the drain plug out. So we got there and pumped the oil out then changed the filter and put fresh oil in it and then started to change the fuel filter but the guy bought the wrong fuel filter.
So that’s what I did at the shop. Today we did a lot of running around, but I still learned a lot.